Skip to main content

Calibrating your acoustic drums

Set up and calibrate your acoustic drum kit with Melodics.

Written by Rhys

⚠️ This guide is for acoustic drums.

Most acoustic kits work with Melodics. It listens to your drums through your microphone, so there's nothing to plug in. Let's get you set up.


1. Choose acoustic drums

Go to Settings, select Drums, and set Instrument type to Acoustic drums. (New to Melodics? You'll be asked to choose your instrument when you first open the app.)


2. Choose your microphone and output

  • Input: the microphone Melodics listens through. OS default (usually your built-in mic) is the best choice for most people. Using a different mic? Make sure it's connected and turned on, then select it.

  • Output: where Melodics' sound plays. See app settings for more.

On iPhone, both are chosen for you.

🎧 Wear headphones while you play. They protect your ears and help Melodics hear your drums clearly over the backing track.


3. Calibrate your kit

Melodics learns how your kit sounds, so take your time with this step.

  1. Sound check: Melodics makes sure it can hear your kit.

  2. Calibrate: hit each drum several times until it turns green.

💡 Play the way you normally would. Hit the center of each drum at your usual volume. There's no need to play louder or softer, or to hit rims or edges.

You can recalibrate any time: go to Settings and click Calibrate.


Drums not being heard?

Acoustic drum scoring isn't quite as precise as electronic drums. Missing the odd note is normal, and we expect at least 90% accuracy for most setups. If Melodics is missing lots of hits:

  1. Recalibrate in Settings.

  2. Turn up your microphone sensitivity if you have to hit hard to be heard: Mac · Windows. Around 20% is a good starting point, but every setup is different.

  3. On iPad or iPhone, there's no mic sensitivity control, so move your device closer to or further from your kit, and make sure the mic isn't covered.

  4. Check Melodics can use your microphone: Mac · Windows · iPad · iPhone

Getting extra hits or echoes?

Turn down your microphone sensitivity (Mac and Windows), then recalibrate.


More tips

Using an external microphone?

Melodics is designed for your device's built-in mic, but you can use an external one by selecting it as your Input. If it's connected through an audio interface, plug it into the interface's first input, which is the one Melodics listens to. Using several mics? Combine them into one channel.

Left-handed?

Lefties, we got you. Turn on Left hand drums in Settings to flip the layout.


Still stuck?

We've got your back. Chat with us using the chat button on this page. Our chatbot knows lots of tips for acoustic setups, and it can pass you to the team if you need a hand.

Did this answer your question?