Hearing a delay between hitting a note and hearing it? That's called latency, and it usually comes down to your sound setup. Good news: it's usually an easy fix.
Quick fixes for everyone
Use wired headphones or speakers. Bluetooth headphones and speakers add a noticeable delay. (Acoustic drums on iPhone are the exception, as Bluetooth headphones work fine there.)
Keep the latency slider low. You'll find it in Settings. Lower means less delay.
What does the latency slider do?
What does the latency slider do?
The slider sets how much audio Melodics processes at a time. All the way left is the lowest delay your setup can manage. Moving it right adds a little delay, but gives your device more breathing room. Keep it as far left as you can without hearing crackles or pops.
On Windows
Most Windows computers aren't set up for low-latency audio out of the box, so this is where delay is most common. The fix is an ASIO driver: professional audio drivers that cut delay right down.
Using your computer's speakers or headphone jack? Install FlexASIO
Go to github.com/dechamps/FlexASIO/releases, the official download.
Find the latest version, and under Assets, download the file named FlexASIO-<version>.exe.
Open the file to install FlexASIO.
Relaunch Melodics, go to Settings, and select FlexASIO ASIO as your audio device.
Seeing "Windows protected your PC"? That's just Windows being careful. FlexASIO from GitHub is safe. Click More info, then Run anyway.
Want more control over FlexASIO?
Want more control over FlexASIO?
The FlexASIO GUI tool makes it easier to change FlexASIO's settings, like output device and buffer size. Download the latest version from its Releases section.
FlexASIO not working? Try ASIO4ALL
FlexASIO not working? Try ASIO4ALL
ASIO4ALL is another free ASIO driver. It doesn't suit every system, but it's worth a try if FlexASIO doesn't work for you.
Using an audio interface?
Most audio interfaces come with their own ASIO driver. Install the latest drivers from the manufacturer's website, then select your interface's ASIO driver in Melodics Settings. If your interface has a buffer setting, a lower buffer means less delay. For setup help, see Connecting your audio interface.
Can't use ASIO? Try exclusive mode
Turn on exclusive mode in Melodics Settings. It lets Melodics use your audio device on its own, which speeds things up.
While exclusive mode or an ASIO driver is on, other apps may not be able to play sound through the same device. Close Melodics, or turn the setting off, to share it again.
On Mac
Macs handle low-latency audio well, so delay from built-in speakers or the headphone jack is rare. If you're hearing a delay:
Check your instrument's connection. The delay may be coming from there. Connect directly to your Mac with a short, good-quality USB cable, and avoid hubs.
Using an audio interface? If it has a buffer setting, lower it to cut the delay. For setup help, see Connecting your audio interface.
On iPad and iPhone
On iPad, check the right output device is selected in Melodics Settings.
On iPhone, sound plays through whatever you connected most recently. For example, if you plug in headphones and then an audio interface, sound comes out of the interface.
Hearing crackles or pops?
That usually means your device is struggling to keep up. Try these:
Move the latency slider in Settings a little to the right, until the crackles stop.
If you're using an audio interface, increase its buffer size.
On Windows, try turning exclusive mode off.
Make sure your audio drivers are up to date.
Using your instrument as an audio interface?
Some instruments, like many electronic drum modules, can also play Melodics' sound. Install any drivers your instrument needs, then select it as your audio device in Melodics Settings.
Roland V-Drums on Mac or Windows: set the module's USB Mode to VENDOR to turn on audio over USB.
Still stuck?
We've got your back. Chat with us using the chat button on this page and we'll help you get your sound sorted.

